How to Disable Bell HomeHub 4000 WiFi

Why Disable Your Bell HomeHub 4000 WiFi?

If you've invested in a high-quality mesh WiFi system like Eero, Google Nest WiFi, UniFi, or any other third-party router, you might be wondering whether you should keep your Bell HomeHub 4000's built-in WiFi enabled. The short answer: you shouldn't.

📖 Setting up Eero with Bell? If you're using an Eero mesh system with your Bell HomeHub 4000, check out our complete guide: [How to Setup Eero Max 7 with Bell HomeHub 4000: Complete Guide]- it covers PPPoE configuration, fixing double NAT, and getting your Eero to work perfectly with Bell Fibe.

Running two WiFi networks simultaneously causes more problems than benefits. Here's why you should disable the HomeHub's WiFi and how to do it properly.

The Problems with Running Dual WiFi Networks

1. WiFi Interference and Slower Speeds

Both your HomeHub and your mesh router broadcast on the same 2.4GHz and 5GHz frequency bands. When two routers operate on overlapping channels, they interfere with each other's signals, causing:

• Reduced WiFi speeds across your entire home
• Unstable connections and frequent disconnections
• Buffering during video streaming
• Lag during online gaming
• Your premium mesh system can't perform at its best

You spent good money on a mesh WiFi system for better coverage and performance. Don't let the HomeHub's WiFi sabotage it.

2. Device Confusion and Connection Issues

With two active WiFi networks, your devices face constant confusion:

• Your phone randomly switches between HomeHub and mesh WiFi
• Smart home devices split across two networks (can't communicate with each other)
• Guests ask "Which WiFi should I connect to?"
• Devices connected to HomeHub WiFi can't benefit from your mesh system's features
• You walk through your house and lose connection as devices switch networks

3. Wasted Energy and Resources

Leaving the HomeHub's WiFi enabled wastes electricity and generates unnecessary heat. The HomeHub radios consume power 24/7 even if no devices are connected to it. With rising energy costs, this adds up over time.

4. Security and Management Complexity

Running two networks means:

• Two networks to secure and monitor
• Two passwords to remember and share
• Your mesh router's security features (ad blocking, parental controls, threat protection) only work on the mesh network
• Harder to troubleshoot network issues
• Confusion about which network is which

When Should You Disable HomeHub WiFi?

You should disable the Bell HomeHub 4000's WiFi if you're using:

• Eero mesh WiFi systems (Eero 6, Eero Pro 6, Eero Max 7)
• Google Nest WiFi or Google WiFi
• TP-Link Deco mesh systems
• UniFi network equipment
• Any third-party router (ASUS, Netgear, Linksys, etc.)

Basically, if you've invested in better WiFi equipment than the HomeHub's basic radios, turn off the HomeHub WiFi.

How to Disable Bell HomeHub 4000 WiFi

Time required: 5 minutes

Step 1: Access the HomeHub Admin Panel

1. Open a web browser on any device connected to your network
2. Go to: http://192.168.2.1
3. Login with your Bell admin credentials:

• Username: admin
• Password: Found on the sticker on your HomeHub (or the password you set)

Step 2: Navigate to Wireless Settings

1. Click on Wireless in the left sidebar
2. Select Basic Settings (or Radio Settings)

You'll see two sections:

• 2.4 GHz Network
• 5 GHz Network

Step 3: Disable 2.4 GHz WiFi

1. Find the 2.4 GHz Wireless section
2. Uncheck "Enable 2.4GHz Wireless" (or toggle it OFF)
3. Click Apply

Step 4: Disable 5 GHz WiFi

1. Find the 5 GHz Wireless section
2. Uncheck "Enable 5GHz Wireless" (or toggle it OFF)
3. Click Apply

Step 5: Confirm Changes

1. The HomeHub will save the changes (takes ~30 seconds)
2. You may see a warning that you'll lose WiFi connection - this is expected
3. Confirm the change

Note: Your device will disconnect from the HomeHub WiFi (if you were connected to it). Simply connect to your mesh WiFi network instead.

How to Verify WiFi is Disabled

On your phone or laptop:

1. Open WiFi settings
2. Look for available networks
3. You should ONLY see your mesh router's network name
4. The HomeHub WiFi networks should be completely gone

If you still see HomeHub WiFi:

• Wait 1-2 minutes and check again
• Restart the HomeHub if needed (unplug for 30 seconds)
• Log back into http://192.168.2.1 and verify settings saved

What Your HomeHub Does Now

After disabling WiFi, your Bell HomeHub 4000 becomes:

• ✅ An internet gateway (connects your home to Bell's network)
• ✅ Still manages Bell Fibe TV (if you have it)
• ✅ Provides ethernet ports (for wired connections)
• ❌ No longer broadcasts WiFi signals
• ❌ No longer causes WiFi interference

This is exactly what you want. The HomeHub becomes a "dumb modem" that passes internet to your superior mesh router.

Common Questions

Can I still access HomeHub settings after disabling WiFi?

Yes! You can access the HomeHub settings in two ways:

Option 1: Use Ethernet

• Connect your laptop directly to HomeHub with an ethernet cable
• Access http://192.168.2.1 as usual

Option 2: Through Your Mesh Network

• Stay connected to your mesh WiFi
• Access http://192.168.2.1 through your browser
• Works because your router is connected to the HomeHub

Can I re-enable HomeHub WiFi later if needed?

Yes, absolutely! Simply:

1. Log into http://192.168.2.1
2. Go to Wireless → Basic Settings
3. Re-enable the 2.4GHz and/or 5GHz radios
4. Apply changes

However, once you experience your mesh system's superior coverage and performance, you won't want to go back!

Will Bell Fibe TV still work?

Yes! Disabling WiFi doesn't affect Bell Fibe TV at all. Your TV boxes connect via ethernet or coax cable, not WiFi. They'll continue working normally.

Will this save electricity?

Yes! WiFi radios consume power. While the savings are modest (likely a few dollars per year), it also reduces heat generation and extends the HomeHub's lifespan.

Final Thoughts

If you've invested in a quality mesh WiFi system or third-party router, disabling your Bell HomeHub 4000's WiFi is one of the smartest network optimizations you can make. It takes 5 minutes and immediately eliminates interference, device confusion, and wasted resources.

Your mesh router can finally perform at its full potential, your devices won't get confused, and you'll have a cleaner, faster WiFi environment throughout your home.

Did you notice improved performance after disabling your HomeHub WiFi? Share your experience in the comments below!